VCEEngine 200-301 Exam Questions | Real 200-301 Practice Dumps
Verified 200-301 Exam Dumps Q&As - Provide 200-301 with Correct Answers
NEW QUESTION 90
Which two values or settings must be entered when configuring a new WLAN in the Cisco Wireless LAN Controller GUI? (Choose two)
- A. SSID
- B. QoS settings
- C. Ip address of one or more access points
- D. management interface settings
- E. Profile name
Answer: A,E
NEW QUESTION 91
Refer to the exhibit.
A packet is being sent across router R1 to host 172.163.3.14. To which destination does the router send the packet?
- A. 207.165.200.254 via Serial0/0/1
- B. 207.165.200.250 via Serial/0/0/0
- C. 207.165.200.246 via Serial0/1/0
- D. 207.165.200.254 via Serial0/0/0
Answer: B
NEW QUESTION 92
Refer to the exhibit.
Which command must be executed for Gi1.1 on SW1 to become a trunk port if Gi1/1 on SW2 is configured in desirable or trunk mode?
- A. switchport mode dynamic auto
- B. switchport mode dynamic desirable
- C. switchport mode trunk
- D. switchport mode dot1-tunnel
Answer: A
NEW QUESTION 93
Which output displays a JSON data representation?
- A. Option C
- B. Option B
- C. Option D
- D. Option A
Answer: A
Explanation:
JSON data is written as name/value pairs. A name/value pair consists of a field name (in double quotes), followed by a colon, followed by a value: "name":"Mark" JSON can use arrays. Array values must be of type string, number, object, array, boolean or null. For example: { "name":"John", "age":30, "cars":[ "Ford", "BMW", "Fiat" ] } JSON can have empty object like "taskId":{}
NEW QUESTION 94
Which two benefits are provided by cloud resources to an enterprise network? (Choose two )
- A. on-demand scalability
- B. complexity at higher cost
- C. easy access with low security
- D. full control of infrastructure
- E. flexibility
Answer: A,E
NEW QUESTION 95
Refer to the exhibit.
What does router R1 use as its OSPF router-ID?
- A. 10.10.10.20
- B. 10.10.1.10
- C. 192.168.0.1
- D. 172.16.15.10
Answer: D
Explanation:
Explanation
OSPF uses the following criteria to select the router ID:1. Manual configuration of the router ID (via the
"router-id x.x.x.x" command under OSPF router configuration mode).2. Highest IP address on a loopback interface.3. Highest IP address on a non-loopback and active (no shutdown) interface.
NEW QUESTION 96
A network engineer is configuring an OSPFv2 neighbor adjacency Drag and drop the parameters from the left onto their required categories on the right. Not all parameters are used
Answer:
Explanation:
NEW QUESTION 97
Refer to the exhibit.
An administrator configures four switches for local authentication using passwords that are stored in a cryptographic hash. The four switches must also support SSH access for administrators to manage the network infrastructure. Which switch is configured correctly to meet these requirements?
- A. SW1
- B. SW4
- C. SW3
- D. SW2
Answer: C
NEW QUESTION 98
How will Link Aggregation be Implemented on a Cisco Wireless LAN Controller?
- A. The EthernetChannel must be configured in "mode active".
- B. When enabled, the WLC bandwidth drops to 500 Mbps.
- C. To pass client traffic, two or more ports must be configured.
- D. One functional physical port is needed to pass client traffic.
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration-guide/b_cg75/b_cg75_chapter_0100
NEW QUESTION 99
Drag and drop the Cisco Wireless LAN Controller security settings from the left onto the correct security mechanism categories on the right.
Answer:
Explanation:
NEW QUESTION 100
Refer to the exhibit.
A network engineer must block access for all computers on VLAN 20 to the web server via HTTP All other computers must be able to access the web server Which configuration when applied to switch A accomplishes this task?
- A. Option B
- B. Option D
- C. Option C
- D. Option A
Answer: A
NEW QUESTION 101
Refer to the exhibit.
An engineer configured NAT translations and has verified that the configuration is correct.
Which IP address is the source IP?
- A. 172.23.104.4
- B. 10.4.4.4
- C. 10.4.4.5
- D. 172.23.103.10
Answer: A
NEW QUESTION 102
Drag drop the descriptions from the left onto the correct configuration-management technologies on the right.
Answer:
Explanation:
Explanation
The focus of Ansible is to be streamlined and fast, and to require no node agent installation.
Thus, Ansible performs all functions over SSH. Ansible is built on Python, in contrast to the Ruby foundation of Puppet and Chef.
TCP port 10002 is the command port. It may be configured in the Chef Push Jobs configuration file .
This port allows Chef Push Jobs clients to communicate with the Chef Push Jobs server.
Puppet is an open-source configuration management solution, which is built with Ruby and offers custom Domain Specific Language (DSL) and Embedded Ruby (ERB) templates to create custom Puppet language files, offering a declarative-paradigm programming approach.
A Puppet piece of code is called a manifest, and is a file with .pp extension.
NEW QUESTION 103
Which mode allows access points to be managed by Cisco Wireless LAN Controllers?
- A. mobility express
https://www.cisco.com/c/en/us/support/docs/wireless/aironet-1200-series/70278-lap-faq.html A Lightweight Access Point (LAP) is an AP that is designed to be connected to a wireless LAN (WLAN) controller (WLC). APs are "lightweight," which means that they cannot act independently of a wireless LAN controller (WLC). The WLC manages the AP configurations and firmware. The APs are "zero touch" deployed, and individual configuration of APs is not necessary. - B. autonomous
- C. bridge
- D. lightweight
Answer: D
NEW QUESTION 104
Drag the descriptions of IP protocol transmissions from the left onto the IP traffic types on the right.
Answer:
Explanation:
NEW QUESTION 105
What is the same for both copper and fiber interfaces when using SFP modules?
- A. They support an inline optical attenuator to enhance signal strength
- B. They provide minimal interruption to services by being hot-swappable
- C. They accommodate single-mode and multi-mode in a single module
- D. They offer reliable bandwidth up to 100 Mbps in half duplex mode
Answer: D
NEW QUESTION 106
R1 has learned route 192.168.12.0/24 via IS-IS, OSPF, RIP and Internal EIGRP Under normal operating conditions, which routing protocol is installed in the routing table?
- A. Internal EIGRP
- B. IS-IS
- C. OSPF
- D. RIP
Answer: A
Explanation:
With the same route (prefix), the router will choose the routing protocol with lowest Administrative Distance (AD) to install into the routing table. The AD of Internal EIGRP (90) is lowest so it would be chosen. The table below lists the ADs of popular routing protocols.
Note: The AD of IS-IS is 115. The "EIGRP" in the table above is "Internal EIGRP". The AD of "External EIGRP" is 170. An EIGRP external route is a route that was redistributed into EIGRP.
NEW QUESTION 107
Which command should you enter to configure a single port to enter an err-disabled state when it receives an infenior BPDU?
- A. spanning-tree portfast bpdufilter
- B. spanning-tree guard root
- C. spanning-tree portfast bpduguard
- D. spanning-tree portfast default
Answer: C
NEW QUESTION 108
An engineer must configure a WLAN using the strongest encryption type for WPA2- PSK. Which cipher fulfills the configuration requirement?
- A. AES
- B. RC4
- C. WEP
- D. TKIP
Answer: A
Explanation:
Explanation
Many routers provide WPA2-PSK (TKIP), WPA2-PSK (AES), and WPA2-PSK (TKIP/AES) as options.
TKIP is actually an older encryption protocol introduced with WPA to replace the very-insecure WEP encryption at the time. TKIP is actually quite similar to WEP encryption. TKIP is no longer considered secure, and is now deprecated. In other words, you shouldn't be using it.
AES is a more secure encryption protocol introduced with WPA2 and it is currently the strongest encryption type for WPA2-PSK.
NEW QUESTION 109
An email user has been lured into clicking a link in an email sent by their company's security organization. The webpage that opens reports that it was safe but the link could have contained malicious code. Which type of security program is in place?
- A. Social engineering attack
- B. brute force attack
- C. Physical access control
- D. user awareness
This is a training program which simulates an attack, not a real attack (as it says "The webpage that opens reports that it was safe") so we believed it should be called a "user awareness" program. Therefore the best answer here should be "user awareness". This is the definition of "User awareness" from CCNA 200- 301 Offical Cert Guide Book: "User awareness: All users should be made aware of the need for data confidentiality to protect corporate information, as well as their own credentials and personal information. They should also be made aware of potential threats, schemes to mislead, and proper procedures to report security incidents. " Note: Physical access control means infrastructure locations, such as network closets and data centers, should remain securely locked.
Answer: D
NEW QUESTION 110
Drag the descriptions of IP protocol transmissions from the left onto the IP traffic types on the right.
Answer:
Explanation:
Explanation
TCP
* Sends tranmissions in sequence
4. Transmits packets individually
6. Uses a lower transmission rate to ensure relability
UDP
5. Uses a higher transmission rate to support latency-sensitive application
2. Transmissions include an 8-byte header
3. Transmits packets as a stream
NEW QUESTION 111
......
Get Top-Rated Cisco 200-301 Exam Dumps Now: https://testking.vceengine.com/200-301-vce-test-engine.html
