Steps Necessary To Pass The HPE0-V15 Exam from Training Expert VCEEngine
Valid Way To Pass HPE ATP - Hybrid IT Solutions V2's HPE0-V15 Exam
HP HPE0-V15 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
NEW QUESTION 48
A client needs a data center network for a highly-virtualized server environment. They have the following requirements
* 25 Gb connectivity from the servers to the top-of-rack switches
* support for iSCSl storage
* lowest possible latency between their VM farms, which are contained In separate cabinets and connected to different top-of-rack switches within the data center
* support for Python script interpretation and open APIs
Which networking product line and architecture should you recommend?
- A. ArubaOS-CX configured in a spine/leaf architecture with 8325 switches at the spine and 8320 leaf switches utilizing VSX between cabinets
- B. HPE FlexFabicc configured in a traditional two-tier architecture with 5950 switches at the core and 5940 access switches configured using IRF stacks per cabinet
- C. ArubaOS-Swrtch configured in a spine/leaf architecture with 5406R switches at the spine and 2930M leaf switches
- D. ArubaOS-CX configured in spine/leaf architecture with 8325 switches at the spine and leaf
Answer: C
NEW QUESTION 49
A small, expanding law firm wants to replace its single Windows server
The server will be kept in their library without a rack. They want a server that allows for internal storage growth and is capable of adding PCI adapters.
Which HPE server model type should you recommend?
- A. HPE DL
- B. HPE ML
- C. HPE XL
- D. HPE BL
Answer: B
NEW QUESTION 50
When should you choose to populate a server with LRDlMMs?
- A. when memory capacity is the most important factor
- B. when error correction is the most important factor
- C. when memory speed is the most important factor
- D. when price is the most important factor
Answer: C
NEW QUESTION 51
What is the correct cable type to use when connecting a server to a switch using 10 Gbps Short Range (SR) SFP+ optical connections?
- A. Direct Attach Cable (DAC)
- B. Twin-Ax
- C. Multi-mode Fiber
- D. Single Mode Fiber
Answer: D
NEW QUESTION 52
A customer Has a data center with third-party routers and firewalls You are designing a new data center network switch architecture consisting of FlexFabric switching for the data network and ArubaOS-Switch switching for the out-of-band management network.
The customer needs a network management platform with the capabilities to manage and monitor the entire environment Which management platform meets the customer requirements?
- A. HPE IMC
- B. Aruba Central
- C. HPE OneView
- D. Aruba Airwave
Answer: A
NEW QUESTION 53
Match the feature to the lowest iLO5 license in which it is available
Answer:
Explanation:
NEW QUESTION 54
Match the Networking Product Family to the appropriate use case:
Answer:
Explanation:
NEW QUESTION 55
What is used to identify a storage HBA port in a Fibre Channel SAN fabric?
- A. SCSI ID
- B. ION
- C. MAC Address
- D. WWN
Answer: D
NEW QUESTION 56
A customer requires an entry-level, all-flash system with predictable performance at the lowest possible price. They have performance-sensitive workloads that require speed and efficiency.
Which HPE storage system needs the customer's requirements?
- A. Nimble CS1000
- B. Nimble SFA
- C. Nimble AF1000
- D. Nimble AF5000
Answer: C
NEW QUESTION 57
A customer needs a server memory subsystem that meets the following requirements:
approaches the speed of traditional DRAM
ensures high capacity, high performance, and ongoing data safety in case of a power failure Which HPE memory feature meets the customer needs?
- A. Fast Fault Tolerance Memory
- B. Load Reduced DIMMs
- C. Persistent Memory
- D. Memory Mirroring
Answer: C
NEW QUESTION 58
Read the question, and then refer to the exhibit.
<Switch-A>display int Ten-GigabitEthernet 1/0/1 Ten-GigabitEthernet1/0/1 Current state: UP Line protocol state: UP IP packet frame type: Ethernet II, hardware address: d894-03fb-793d Description: Ten-GigabitEthernet1/0/1 Interface Bandwidth: 10000000 kbps Loopback is not set Media type is stack wire, port hardware type is STACK SFP_PLUS 10Gbps-speed mode, full-duplex mode Link speed type is autonegotiation, link duplex type is autonegotiation Flow-control is not enabled Maximum frame length: 10000 Allow jumbo frames to pass Broadcast max-ratio: 100% Multicast max-ratio: 100% Unicast max-ratio: 100% PVID: 1 MDI type: Automdix Port link-type: Trunk VLAN Passing: 10 VLAN permitted: 10 Trunk port encapsulation: IEEE 802.1q Port priority: 0 <SNIP> An administrator connected a hypervisor to interface Ten-Gigabit Ethernet1/0/1 in a switch. The administrator created virtual machines in VLAN 10 and 20 on the hypervisor. These VLANs are configured to be tagged on the hypervisor.
The administrator found that all the virtual machines within VLAN 20 can communicate with each other, but not to any resource on VLAN 20 outside the hypervisor.
What must you do to resolve this issue?
- A. Configure the PVID of the interface to be VLAN 20.
- B. Configure the interface as an IRF port.
- C. Permit VLAN 20 on the interface.
- D. Configure the interface as an access port.
Answer: C
NEW QUESTION 59
An administrator has two switches connected with a single link. The administrator observes that, during hours of peak activity, the storage traffic tends to consume the link. The link is shared with other types of traffic that is time sensitive.
What technology can the administrator use to help alleviate the situation while they are working towards a long-term solution?
- A. Open Shortest Path First (OSPF)
- B. Priority-based Flow Control (PFC)
- C. RDMA over Converged Ethernet (RoCE)
- D. Multi Active Discriminator (MAD)
Answer: C
NEW QUESTION 60
Match each ProLiant solution to its ideal use case
Answer:
Explanation:
NEW QUESTION 61
Which HPE Proliant server should you recommend for a home office environment where the server will be located in the same office as the user?
- A. HPEXL170r
- B. HPE DL20
- C. HPE ML110
- D. HPE MicroServer
Answer: C
NEW QUESTION 62
A customer needs a low cost block storage array for targeted workloads. The array needs to provide automated tiering, thin provisioning, and snapshot capabilities.
Which HPE storage solution meets the customer requirements?
- A. HPE MSA
- B. HPE D3000
- C. HPE Nimble
- D. HPE StoreEasy
Answer: A
NEW QUESTION 63
Match the characteristic to the correct HPE ProLiant family.
Answer:
Explanation:
NEW QUESTION 64
Refer to the exhibit.
Drag the correct protocols from the left to the appropriate area on the topology on the right.
Answer:
Explanation:
NEW QUESTION 65
Which feature in a block storage array is effective in decreasing the size of blocks?
- A. compression
- B. thick provisioning
- C. thin provisioning
- D. deduplication
Answer: A
NEW QUESTION 66
What is a benefit of a NAS device?
- A. shared Block Level access
- B. iSCSl Protocol services
- C. dedicated file services
- D. SAS connectivity to hosts
Answer: C
NEW QUESTION 67
Refer to the exhibit.
You are configuring a pair of HPE 5945 switches into an IRF stack You have cabled the switches as depicted in the exhibit Into which IRF Ports should you place each switch interface?
- A.
- B.
- C.
- D.
Answer: A
NEW QUESTION 68
An administrator deployed a new FlexFabric switch Into the environment and wants to collect baseline information from the switch The administrator wants to be able to use this in case there is any question from support should the administrator open a case.
Which command can the administrator use to collect support information from the switch?
- A. show switch Info
- B. display diagnostic-information
- C. support save
- D. show tech all
Answer: B
Explanation:
https://support.hpe.com/hpesc/public/docDisplay?docId=c04406895
NEW QUESTION 69
You are configuring an MSA 2052 for one of your customers in OCA.
Click on either one of the two places on the Bill of Materials screen that will enable you to verify the configuration and get details on any errors.
Answer:
Explanation:
NEW QUESTION 70
Refer to the exhibit.
You are validating a Nimble HF40 configuration created in OCA, and you receive an error when you run a CLIC check.
Which Nimble component needs to be added to the configuration to complete the solution?
- A. HPE Nimble Storage HF40 Adaptive Array R2 2.88 TB FIO Cache Bundle
- B. HPE Nimble Storage C19 to C20 250V 16 Amp 1.8m PDU Base Array FIO Power Cord
- C. HPE Nimble Storage HF40/60 Adaptive ES3 21TB HDD 1.44 TB Cache CTO Expansion Shelf
- D. HPE Nimble Storage Embedded 10GBASE-T 2-port FIO Adapter
Answer: C
NEW QUESTION 71
......
All HPE0-V15 Dumps and Delta - Building HPE Hybrid IT Solutions Training Courses: https://testking.vceengine.com/HPE0-V15-vce-test-engine.html
