Oracle 1Z0-1048-21 Practice Test Pdf Exam Material
1Z0-1048-21 Answers 1Z0-1048-21 Free Demo Are Based On The Real Exam
NEW QUESTION 47
How should you configure Time and Labor Approvals to route to multiple approvers so that if a Payroll Layout time card only contains regular hours, it routes to the Line Manager, but if the time card contains an absence, it can also route to an HR admin?
- A. This is not possible.
- B. You should use the BPM Worklist and modify the Payroll Time Card Approval - > BPM task:
TimecardApproval and BPM Worklist, andmodify the BPM task: AbsencesApprovalsTask. - C. You should use the BPM Worklist and modify the Payroll Time Card Approval - > BPM task:
TimecardApproval. - D. You should use the BPM Worklist and modify the BPM task: AbsencesApprovalsTask.
- E. You should use the BPM Worklist and modify the Project Time Card Approval - > BPM task:
ProjectTimecardApproval.
Answer: B
NEW QUESTION 48
The Generate time cards process is run for an HCM group called "group 1" with the "Available from date" = 1 Jan 2016 and the "Available to date" = 1 March 2016.
Which time cards will be generated?
- A. Time cards for the primary assignment of workers who are active members of "group 1" during the available date range. Time cards with any date within the range 1 Jan 2016 and 1 March 2016 will be created. Any existing time cards and data will not be changed.
- B. Time cards for all assignments of workers who are active members of "group 1" during the available date range. Only time cards starting on or after 1 Jan 2016 and ending on or before 1 March 2016 will be created. The existing time cards will be replaced.
- C. Time cards for the primary assignment of workers who are active members of "group 1" during the available date range. Only time cards starting on or after 1 Jan 2016 and ending on or before 1 March
2016 will be created. Any existing time cards and data will not be changed. - D. Tine cards for the primary assignment of workers who are active members of "group 1" during the available date range. Only time cards starting on or after 1 Jan 2016 and ending on or before 1 March
2016 will be created. The existing timecards will be replaced. - E. Time cards for the primary assignment of workers who are active members of "group1" on 1 March
2016. Only time cards starting after 1 Jan 2016 and ending on or before 1 March 2016 will be created.
Any existing time cards and data willnot be changed. - F. Time cards for all assignments of workers who are active members of "group 1" during the available date range. Time cards with any date within the range 1 Jan 2016 and 1 March 2016 will be created.
Any existing time cards and data will not be changed.
Answer: D
NEW QUESTION 49
Which are valid approval time periods for Time and Labor?
- A. weekly, semimonthly
- B. weekly, biweekly, monthly
- C. any, just depends onthe Repeating Time Period used in the Approval Rule
- D. any, just depends on the HCM Group used in the Approval Rule
- E. weekly, biweekly
- F. weekly, semimonthly, monthly
Answer: C
NEW QUESTION 50
Which option will not enhance the reusability of a Time Calculation Rule template when defining rules?
- A. Rule Template Definition > Time Card Events That Trigger Rule option
- B. Rule Template Parameters > Formula Parameters types
- C. Rule Template Outputs > User Defined Output Sources
- D. Rule Template Definition >Summation Level
- E. Rule Template Definition > Reporting Level
Answer: C
NEW QUESTION 51
Which delivered Role,Workarea, and Task combinations should be used when troubleshooting rule processing issues to determine which rules and rule sets are executed against a specific worker's time card for a specific time card action?
- A. Time and Labor Administrator, Time Management Work Area, Analyze Rule Processing Details Task
- B. Time and Labor Manager, Time Management Work Area, Analyze Rule Processing Details Task
- C. Time and Labor Administrator, Setup and Maintenance Work Area, Manage Worker Time Processing Profile Task
- D. Time and Labor Administrator, Setup and Maintenance Work Area, Analyze Rule Processing Details Task
- E. Time and Labor Manager, Time Management Work Area, Manage Time Repository Rule Sets
- F. Time and Labor Manager, Setup and Maintenance Work Area, Analyze Rule Processing Details Task
Answer: C
NEW QUESTION 52
What When executingthe Generate Time Card Fields process, that will be setting the parameter "Include Absence Types" to Yes accomplish?
- A. none of the above
- B. enables entry of Absence Plans directly on the time entry and calendar entry layouts
- C. creates a multiple-attribute time card field with Absence Management type and Payroll Time type time attributes
- D. enables Absence entries on the time entry and calendar entry layouts
- E. updates available absence values for selection within the existing time card fields
- F. createsa multiple-attribute time card field with only the Absence Management type time attribute
Answer: D
NEW QUESTION 53
Your customer has implemented Fusion Payroll and defined a set of elementsand CIRs (Calculation Information Repository) with restricted element eligibility.
How should you restrict the displayed payroll time types to match the payroll element eligibility?
- A. The payroll elements are placed in one multiple-attribute time card field and the layout set is assigned by using the time entry profile.
- B. The payroll element eligibility definition is automatically usedto restrict the displayed values on the time card.
- C. The payroll elements are placed in several multiple-attribute time card fields and the layout set is assigned by using the time entry profile.
- D. The payroll elements are placed in one multiple-attribute time card field and restricted by using the enabled value.
Answer: A
NEW QUESTION 54
A rule used in the production environment is deliveringincorrect results. It was determined that the formula and template were correct, but the rule input and output parameters were not set up with the correct values.
Which option describes, at a high level, how should you resolve the issue?
- A. Delete the incorrect rule from the rule set. From the Manage Time Repository Rules task, select the incorrect rule and select Actions - Edit Deployed Rule. Correct the input and output values. Re-add the corrected rule to the rule set using the appropriate edit options. Resubmit the incorrect time cards.
- B. Set the WFM Administrator Profile Value: HWM_ALLOW_RULE_EDITS to "Yes". Edit the deployed Rule to correct the input and output values. Resubmitthe incorrect time cards.
- C. Set the WFM Administrator Profile Value: HWM_ALLOW_RULE_EDITS to "Yes". Delete the incorrect rule from the rule set. From the Manage Time Repository Rules task, select the incorrect rule and select Actions - Edit Deployed Rule. Correct the input and output values. Re-add the corrected rule to the rule set using the appropriate edit options. Resubmit the incorrect time cards.
- D. Duplicate the incorrect Rule, and correct input and output values in the new rule. Update the rule set using the appropriate edit options to use the new rule. Resubmit the incorrect time cards.
Answer: C
NEW QUESTION 55
How should you enable population of the Supplier Device Event list of values in mappings?
- A. By doing nothing. The list of events is defaulted with one In event and one Out event.
- B. By defining a value set to list the supplier events
- C. By defining the value of the supplier in the TCD suppliers lookup first, andthen the values of the supplier events in the TCD Supplier Events lookup
- D. By defining the values in the TCD Supplier Events lookup only
Answer: C
Explanation:
Explanation
Reference
https://docs.oracle.com/en/cloud/saas/global-human-resources/r13-update17d/faitl/time-collection-device-config
NEW QUESTION 56
What is the correct sequence of steps and new defined objects required to enable customer-defined messages as an option when defining different time card validation rules?
- A. Define a new Message as CUST_HWM_<message name>, select the new messages when defining a TER rule, and assign the rule using a rule set and time processing profile.
- B. Define a new message as WFM_<message name>, select the new message when defininga TER rule, and assign the rule using a rule set and time processing profile.
- C. Define new messaged as CUST_HWM_<message name>, select the new messages when defining a TDR or TER rule, and assign the rule using a rule set and time processing profile.
- D. Define new messages as HWM_<message name>, select the new messages when defining a TER rule, and assign the rule using a rule set and time processing profile.
Answer: A
NEW QUESTION 57
What determines the validation and approval of payroll timetypes for Fusion Payroll?
- A. Assignment of the delivered payroll layout set and time entry options.
- B. Assignment of a properly defined payroll time consumer set.
- C. Assignment of the customer-defined Time and Labor - Time Entry Rules (TER).
- D. Use of the delivered payroll time attributes and payroll time card fields.
Answer: D
NEW QUESTION 58
The HCM Groups you have created need to be refreshed nightly to update the group members based on employment changes.
What steps must you configure in order to include the group in the refresh process?
- A. When configuring the HCM Group, you must select the "include in Refresh All Group Process" and then the group will automatically refresh nightly.
- B. When Configuring the HCM Group, you must select the "Include in Refresh All Group process" checkbox, and then schedule the "Evaluate HCM Group Membership" process to run nightly.
- C. Schedule the "Evaluate HCM Group Membership" process to run nightly.
- D. The Evaluate HCM Group Membership can only be configured to run for one group at a time, so you must setup a recurrence for each group to refresh separately nightly.
Answer: B
NEW QUESTION 59
You are setting up a scheduler profile for a manager, but you cannot find this manager in the Group Manager list.
What are three reasons for this?
- A. This manager doesn't have the Time and Labor Manager role.
- B. This manager is not identified as a Line Manager in his HR record.
- C. This manager's hire date is later than the scheduler profile effectivestart date.
- D. You didn't run the Refresh Manager Hierarchy job.
Answer: A,C,D
Explanation:
Explanation
The Refresh Manager Hierarchy process populates the denormalized manager hierarchy table when personrecords are migrated from other applications. Otherwise, whenever a change is made to a person's manager hierarchy, the change is reflected automatically in the denormalized manager hierarchy table.
However, by running the Refresh Manager Hierarchy processin addition to these automatic individual updates, you can ensure that the denormalized manager hierarchy is as accurate as possible. Refresh Manager Hierarchy processes all types of manager hierarchies.
NEW QUESTION 60
You areupdating your team schedule in order to publish it. However, you notice that the first day of the week is Monday when it should be Sunday. What is the reason for this?
- A. The first day of the week is defaulted to Monday in the Planned and Published Schedules.
- B. The first day of week is set as Monday in both places: the repeating period and yourscheduler profile.
- C. The first day of the week is set as Monday in your scheduler profile.
- D. The first day of the week is set as Monday in the repeating period.
Answer: C
NEW QUESTION 61
You are managing your team schedule andyou cannot see one of your worker's schedule. This worker has a work schedule typed as duration. What is causing this?
- A. Duration work schedules are not supported in the Planned and Published Schedules.
- B. Shift short name has not been set for the shifts that composed the worker's work schedule.
- C. Shift limits have not been set for the shifts that composed the worker's work schedule.
- D. The worker's work schedule is assigned to hisprimary assignment.
Answer: D
NEW QUESTION 62
Your customer wants to use badge readers as a time collection device. You have added your device supplier to the lookup as BADGE_READERS_INC.
While adding the supplier device events to the lookup, which two lookup codes should you use for your Badge In and Badge Out events?
- A. OUT_BADGE_READERS_INC
- B. BADGE_READERS_INC_IN_OR_OUT
- C. BADGE_READERS_INC_OUT
- D. BADGE_READERS_INC_IN
- E. IN_BADGE_READERS_INC
Answer: A,E
NEW QUESTION 63
You need to easily identify and copy time card data while managing time cards.
Which action can use in the Favorite Time Cards feature to accomplish this?
- A. delete a current time card
- B. process time cards for mass approval
- C. recalculate for retroactive changes
- D. create or complete your current time card
Answer: D
NEW QUESTION 64
A senior system designer has asked you to create time consumersets for both Project Costing and Project Execution Management by using the delivered time category of All Projects Entries and for time to be transferred only when approved. How should you achieve this?
- A. This cannot be done because although the time consumer set can be configured to transfer time cards to Project Execution Management only when approved, the time category of All Projects Entries cannot beused.
- B. This cannot be done because only absence entries can be transferred to Project Execution Management and time cards transferred to Project Execution Management are transferred when they are submitted.
- C. You would modify the delivered All Projects Entries time category to contain only absence entries and use this in both time consumer sets. Transferring only on approval is the default behavior for both time consumers.
- D. This cannot be done because although All Projects Entries can be used for the time category, time cards can be transferred to Project Execution Management only when they are submitted.
Answer: B
NEW QUESTION 65
How would you enable a weekly overtime calculation on a bi-weekly time card so that on the eighth day of the time card, the overtimecalculation is reset?
- A. You would use a weekly repeating period for the time calculation rules and define a bi-weekly repeating period for the time entry layout. When creating the weekly overtime rule, you would need to copy and customize the WFM_THRESHOLD_TIME_CALCULATION_RULE_AP formula to reset the total after seven days.
- B. This is not possible so you will not do anything.
- C. You would use a bi-weekly repeating period for the time calculation rules and define a bi-weekly repeating period for the time entry layout. When creating the weekly overtime rule, you would need to copy and customize the WFM_THRESHOLD_TIME_CALCULATION_RULE_AP formula to reset the total after seven days.
- D. You would use a weekly repeating period for the time calculation rules and define a weekly repeating period for the time entry layout. When creating the weekly overtime rule, you would need to copy and customize the WFM_THRESHOLD_TIME_CALCULATION_RULE_AP formula to reset the total after seven days.
Answer: D
NEW QUESTION 66
Which three tasks can a Time and Labor Manager perform from the planned schedule?
- A. Schedule shifts.
- B. Balance workloads.
- C. Monitor absences.
- D. Monitor work coverage.
- E. Enter time for workers.
Answer: A,B,D
Explanation:
Explanation
Reference: https://docs.oracle.com/cloud/r13_update17b/globalcs_gs/FAUTL/FAUTL1657098.htm#FAUTL1657
NEW QUESTION 67
Which two statements are true?
- A. Time Card approval period must be the same as the Time Card period.
- B. Time Card Approval Period must be a multiple of the Time Card period.
- C. Time Card Approval Period is defined in the Time Consumer Set.
- D. Time Card Approval Period can be less than the Time Card Period.
Answer: A,C
NEW QUESTION 68
Which three types of information can be linked to a Web Clock button?
- A. time device mapping
- B. time card field
- C. display icon
- D. time device rule
- E. logic rule sequence
Answer: A,B,D
NEW QUESTION 69
You have 10 differentLegislative Data Groups (LDG) defined. Each LDG has a different set of Payroll Time Types and Absence Types.
How should you configure a Layout Component to display the proper values in one single list on the Time Entry Layout?
- A. Create a Multiple Attribute Time Card Field, filtering the list using Assignment ID.
- B. Create a Multiple Attribute Time Card field, filtering the displayed values based on the LDG Filtering function.
- C. Create a Multiple Attribute Time Card Field, filtering the list using Element Eligibility.
- D. Cannot be done in one list. This requires two separate selection lists (Time Card fields), placed on the Time Entry Layout.
Answer: B
NEW QUESTION 70
......
1Z0-1048-21 [Mar-2022] Newly Released] Exam Questions For You To Pass: https://testking.vceengine.com/1Z0-1048-21-vce-test-engine.html
