[Jan-2022] NACE-CIP2-001 Dumps are Available for Instant Access using VCEEngine
NACE-CIP2-001 Dumps 2022 - New NACE NACE-CIP2-001 Exam Questions
NEW QUESTION 50
Galvanizing performs best in which of the following exposures:
- A. pH below 4
- B. pH of 13
- C. pH between 5-10
- D. pH above 12
Answer: C
NEW QUESTION 51
NACE No.13/ SSPC 6 identifies the use of:
- A. Abrasive blasting only
- B. Watterjetting only
- C. Various methods of cleaning
- D. Steam cleaning only
Answer: C
NEW QUESTION 52
Application of Thermal Spray Coatings requires:
- A. The same skills as welding
- B. Specialized skills supported by training and experience
- C. The same skills as liquid coatings
- D. No particular skills
Answer: B
NEW QUESTION 53
Differences in technique for abrasive blasting concrete versus steel require the operator to:
- A. a), b) and c)
- B. Lower the blast pressure
- C. Increase the standoff distance
- D. Move the nozzle quicker
Answer: A
NEW QUESTION 54
Coating surveys may include which steps?
Select All That Apply:
- A. Summarize the collected data
- B. Schedule the remedial work
- C. Develop a survey plan
- D. Evaluate the coatings performance
Answer: A,B,C,D
NEW QUESTION 55
NACE Level 2 Inspectors have been authorized to perform:
- A. Visual inspection, Non-Destructive and Destructive testing
- B. Visual inspection only
- C. All types of inspection without supervision
- D. Visual inspection and Non-destructive testing
Answer: A
NEW QUESTION 56
When working with someone who is very concerned about Stability and maintaining adherence to the status-quo, the Inspector should try to:
- A. Implement immediate to get them motivated
- B. Challenge their value to the team and try to get them out of their comfort zone
- C. Make sure they are the center of attention in all site meetings
- D. Give them as much advance notice as possible about upcoming changes
Answer: D
NEW QUESTION 57
When a coating is expected to be exposed to temperatures above 93C (200 F) the best choice would be:
- A. Organic coatings
- B. Inorganic Coatings
- C. Polyurea
- D. Latex
Answer: B
NEW QUESTION 58
The standards defining surface cleanliness achieved by centrifugal blast cleaning are:
- A. Slightly different to air blast cleaning
- B. The same as air blast cleaning
- C. Comparable to air blast cleaning
- D. Different than air blast cleaning
Answer: B
NEW QUESTION 59
NACE Standards include:
- A. Material Requirements
- B. a) only
- C. Standard Practices
- D. a) & b)
Answer: D
NEW QUESTION 60
From a corrosion perspective, the main difference between Ferrous and Non-Ferrous Metals is:
- A. Iron content
- B. Safety
- C. Appearance
- D. Cost
Answer: A
NEW QUESTION 61
Measuring methyl ethyl ketone (MEK) resistance of ethyl silicate inorganic zinc-rich primers by solvent rub requires
- A. 35 single rubs with a saturated cloth.
- B. 25 double rubs with a saturated cloth.
- C. 25 single rubs with a saturated cloth.
- D. 50 double rubs with a saturated cloth.
Answer: D
NEW QUESTION 62
An Inspection and Test Plan is required when:
- A. When the Coating Applicator requests one
- B. When the Inspector requests one
- C. When the Owner specifies one
- D. It is always required
Answer: D
NEW QUESTION 63
The main reason dehumidification is used during coating operations is to
- A. control the environment
- B. allow the contractor to guarantee the completion date.
- C. avoid repetitive blasting/coating operations.
- D. reduce the possibility of missing the recoat window.
Answer: A
NEW QUESTION 64
Which concrete smoothing technique involves scrubbing a mixture of cement mortar over the concrete surface using ai cement sack, gunny sack, or sponge rubber float?
- A. High-pressure water washing
- B. Acid etching
- C. Sacking
- D. Stoning
Answer: C
NEW QUESTION 65
WJ-1 is always performed using UHWJ at pressures above 210 MPa (30,000 PSI)
- A. True
- B. False
Answer: A
NEW QUESTION 66
Which surface preparation method uses a dilute acid solution to remove laitance and I roughen the concrete surface?
- A. Sacking
- B. High-pressure water washing
- C. Acid etching
- D. Stoning
Answer: C
NEW QUESTION 67
Dehumidification is defined as the removal of moisture vapor from the air to
- A. provide worker comfort.
- B. lower its temperature
- C. raise its relative humidity.
- D. lower its dew point,
Answer: D
NEW QUESTION 68
It is always possible to see moisture on a steel substrate:
- A. False
- B. True
Answer: A
NEW QUESTION 69
......
NACE NACE-CIP2-001 Exam Practice Test Questions: https://testking.vceengine.com/NACE-CIP2-001-vce-test-engine.html
