100% Free Real Updated DES-DD23 Questions & Answers Pass Your Exam Easily [Q14-Q34]

Share

100% Free Real Updated DES-DD23 Questions & Answers Pass Your Exam Easily

Easily To Pass New DES-DD23 Verified & Correct Answers

NEW QUESTION 14
Which component executes the read/write requests in a backup environment consisting of a PowerProtect DD appliance and IBM Spectrum Protect?

  • A. Master Server
  • B. Media Agent
  • C. Spectrum Protect Server
  • D. Media Server

Answer: B

 

NEW QUESTION 15
Refer to the exhibit.

Match each action to its call-out location.

Answer:

Explanation:

 

NEW QUESTION 16
Which port/protocol is used when using a syslog server to monitor a PowerProtect DD system?

  • A. 514/UDP
  • B. 514/TCP
  • C. 2051/UDP
  • D. 2051/TCP

Answer: A

 

NEW QUESTION 17
A backup administrator has enabled the Retention Lock feature on their PowerProtect DD appliance. Over time, the administrator noticed an increase in file system utilization. Upon further investigation, the administrator discovered expired files are still present on the appliance.
What is the most likely reason for this issue?

  • A. The time of the file was set below the minimum retention period
  • B. Retention Lock feature was disabled before the expiration date
  • C. Backup application failed to delete the file after expiration
  • D. File system cleaning was disabled

Answer: C

 

NEW QUESTION 18
When the PowerProtect DD system boots up for the first time, the CLI configuration wizard script does not start automatically.
Which command can be used to start the script manually?

  • A. setup config
  • B. configure terminal
  • C. config wizard
  • D. config setup

Answer: D

 

NEW QUESTION 19
What is a requirement to configure the PowerProtect DD tape out to cloud feature?

  • A. Cloud Tier Capacity License
  • B. Tape Out to Cloud License
  • C. DDVE in the Cloud
  • D. Two cloud units

Answer: A

Explanation:
DD VTL supports storing the VTL vault on Cloud Tier storage. To use this functionality, the protection system must be a supported Cloud Tier configuration, and have a Cloud Tier license in addition to the VTL license.

 

NEW QUESTION 20
What rule must be followed during an upgrade procedure with the FS25 expansion shelf?

  • A. If ES40 SAS shelves are on the same chain as an FS25, the maximum number of shelves on that chain is five
  • B. FS25 shelf must be on the same chain with DS60
  • C. For high performance, the connections from a controller to FS25 shelves must be over FC cables
  • D. FS25 shelf is cabled on a separate private chain

Answer: D

 

NEW QUESTION 21
An administrator is scaling Cloud Tier for a DD9400 by adding a second cloud unit. What is the required amount of metadata storage (TB)?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: B

 

NEW QUESTION 22
What is the preferred method to ensure backups are protected against deletion or corrupt?

  • A. Encryption
  • B. Retention Lock
  • C. Dell EMC Cloud Tier
  • D. Data Invulnerability Architecture

Answer: B

 

NEW QUESTION 23
An engineer is deploying two PowerProtect DD6900 systems in an HA pair. The installation includes ES40, DS60, and FS25 expansion shelves.
What consideration should be made when cabling the hardware?

  • A. The FS25 shelf must be fully populated
  • B. The FS25 shelf should be cabled on a separate chain
  • C. The DS60 shelf must be populated with identical drives
  • D. The DS60 shelf should be cabled on a separate chain

Answer: C

 

NEW QUESTION 24
A backup administrator is tasked with verifying the compression savings of a PowerProtect DD9900. Which compression algorithm will they see enabled by default?

  • A. lz
  • B. lzw
  • C. gz
  • D. gzfast

Answer: D

 

NEW QUESTION 25
A technician is upgrading a DD9400 with a DS60 expansion shelf with 60 drives. In the GUI interface, only 30 drives are accessible.
What is causing these drives to be inaccessible?

  • A. There are not enough spare drives.
  • B. The capacity license applied is only for 30 drives.
  • C. A second SAS connection from DD9400 to DS60 is not activated.
  • D. There are not enough cache drives on the DD9400 to support the extra capacity.

Answer: B

Explanation:
The DS60 ships with 60 drives installed. Depending on the capacity license applied to the PowerProtect DD system either 15, 30, 45, or 60 drives will be accessible

 

NEW QUESTION 26
The finance department requires PDFs older than 90 days to be archived through Cloud Tier into Azure Blob Storage. They want any PDFs older than 180 days archived into AWS S3.
Which data movement policy is used to archive files into Azure Blob Storage?

  • A. App-driven
  • B. Recall
  • C. Age-based
  • D. Age-range

Answer: C

 

NEW QUESTION 27
A customer needs an upgrade on their DD6900 to use HA. Which expansion shelf is required?

  • A. ES25
  • B. FS25
  • C. DS60
  • D. ES40

Answer: D

 

NEW QUESTION 28
Backup administrators have noticed slow backups on the AIX environment.
To fix the issue, what should the set large_send be for each NIC, and what should the NFS option be set to?

  • A. yes and nfs_rfc1323=0
  • B. no and nfs_rfc1323=1
  • C. yes and nfs_rfc1323=1
  • D. no and nfs_rfc1323=0

Answer: B

Explanation:
To optimize TCP/IP performance on the AIX host, set large_send to no for each NIC interface.

 

NEW QUESTION 29
A storage administrator finished the zoning between the PowerProtect DD and the NetWorker backup server. How can they verify that the zoning was completed properly and the server HBA are visible?

  • A. scsitarget initiator list
  • B. scsitarget show initiator
  • C. scsitarget show initiator list
  • D. scsitarget initiator show list

Answer: D

 

NEW QUESTION 30
Which of the following protocols are supported by PowerProtect DD for data movement to a cloud provider?

  • A. CIFS and NFS
  • B. VTL and DD Boost
  • C. HTTP and HTTPS
  • D. FTP and FTPS

Answer: A

 

NEW QUESTION 31
What is the order of steps to configure DD Boost on the backup host?

Answer:

Explanation:

 

NEW QUESTION 32
Backup administrators have noticed slow backups on the AIX environment.
To fix the issue, what should the set large_send be for each NIC, and what should the NFS option be set to?

  • A. yes and nfs_rfc1323=1
  • B. yes and nfs_rfc1323=0
  • C. no and nfs_rfc1323=0
  • D. no and nfs_rfc1323=1

Answer: A

 

NEW QUESTION 33
What are the steps to configure the Retention Lock Compliance?

Answer:

Explanation:

Reference:
https://datastorageasean.com/sites/default/files/EMC-data-domain-retention-lock-wp.pdf

 

NEW QUESTION 34
......


EMC DES-DD23 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Monitor PowerProtect DD capacity and estimate storage burn rate
  • Implement Dell EMC PowerProtect DD system with key protocols, including NFS
  • CIFS, DD Boost, VTL, and NDMP
Topic 2
  • Describe how to perform the initial configurations of the Dell EMC PowerProtect DD system
  • Describe Dell EMC Cloud Tier features, benefits, architecture and use cases
Topic 3
  • Configure the network for administrative access, and verify interoperability with connected devices
  • Cloud Tier Implementation and Administration
Topic 4
  • Verify hardware and analyze and interpret space utilization and compression graphs
  • Distinguish between key backup software components
Topic 5
  • Describe how to prepare the Dell EMC PowerProtect DD system for installation, including rail and rack the system hardware, and connect and cable the system to external storage
Topic 6
  • Identify and describe various Dell EMC PowerProtect DD software options and the functionality they enable
  • Manage system access and describe and configure autosupport, Support bundle, SNMP, and Syslog

 

Free DES-DD23 Exam Files Downloaded Instantly: https://testking.vceengine.com/DES-DD23-vce-test-engine.html